qurotro's latest activity
-
Red Beard V -Stack ,👍 -
I did run a wire brush across them, the screw is too small for the adjuster point. I can insert the screw through the adjuster point...
-
Be prepared for jokers to message you saying they used to buy them for $649 all day long and whatever you are asking is highway robbery.
-
qurotro replied to the thread Husqvarna 2100 thread.Looks legit to me. Maybe clearing the threads on both of them.
-
Can’t be a 4, way too small. The ones I have for those saws are m6. The 266 series are m5. Shown is the correct m6 point but a m5...
-
I've been down this rabbit hole, without any apparent rhyme or reason some tensioner bolts have e clip notches, others don't. I recall...
-
Check with Max (@knightmax), I think he may have some reproduction spark plug covers that would work on that saw. Mark
-
If your not an OEM snob the brake flag, carb shield and deflector from Farmertec is a cheap option. Quality OK. Their caber rings for...
-
Got a little more organized
-
I pulled the saw out this weekend and took out the carb, I was right, I had smashed the gasket between the carb and intake gasket and...
-
I ordered one I guess I'll be letting everyone know how it works out.🤣
-
qurotro reacted to sawmikaze's post in the thread What are NOS reduced weight bars worth ? with
Like.
I have 3 Oregon Reduced Weight Bars in stihl mount, 2 -28" bars and 1-32" in 50 gauge I wanna get rid of and I don't know what to sell... -
I've learned something, guess I can quit for today... Mark
-
Not quite true, if you get a stock Husqvarna 350 cylinder base like the one pictured below you can run a 346/350/353 top end on a 345.
-
I bet you have the small journal crank 501 80 30-01 is the bronze one 501 29 27-02, plastic Same through early 288s