president's latest activity
-
PDiamond probably has them but I haven’t checked their site in a while. They are not as good, imo, but many here like them.
-
PSo I have to order one from Lithuania? There is no dealer in the US?
-
PBaltic has them…I have a couple. Shipping from Lithuania is still costly so take that into consideration. I have a new one in route so...
-
PAnyone looking for handle inserts?
-
PJust to wake this thread up... New to me 88, needed new ring otherwise pretty good nick.
-
PI'd be interested to see the carb linkage set up. The 181 used a metal rod link connection to the carb. The 288 used a pad contact...
-
PI think I see the bar pads present, the clutch however appears to be out too far as in something is holding it back from going in all...
-
PEarly models had both an inside and outside steel bar pad, later models had just the inner one.
-
PA well built 395 isn't going to be ousted by a 592 as pointed out by Shaun below. I do think there is a chance that a well built ms661...
-
PHi Konrad. Look up EPS air filters. He has one that’s oiled foam and it will fit under your stock cover. Or you could go with the max...
-
PMax Flow are nice especially if you like the larger air cleaner cover. Egan Performance Saws makes a foam filter that fits under the...
-
Ppresident reacted to jacktheripper's post in the thread SOLD Stihl 066/660 Arctic Full Wrap Kit with
Like.
Granted I had this one running fat (wasn’t sure how long it had been sitting in the barn that I got it from), it seems to be of the... -
Ppresident reacted to jacob j.'s post in the thread SOLD Stihl 066/660 Arctic Full Wrap Kit with Like.
The 910s are pretty good runners. They were a bridge model between the older series (70, 80/801, 90) and the newer saws of the...
-
PThe brake internals for the 2101 are the same as the 281/288 and are floating around. The flag handles are the hard parts to find.
-
PA flavor cylinder, nos tank