president's latest activity
-
PThe STIHL 2-in1 (same as the Pferd model) is insanely popular. Like it or hate it, many casual chainsaw users see it as a convenient...
-
PI've got a little bench top bender that I got 4 or 5 years ago and haven't even set up yet. It should make quick work of this. It's...
-
PJust weld in a section of 3/8” tube. Let us know how you bend it. I have one to repair :p
-
PWhat a racket...a neighbor took his MS 311 into the shop that wouldn't start, shop said it had low compression and needed a new piston...
-
Ppresident reacted to HumBurner's post in the thread HELP! How to know when you have too much hook with
Love.
Happiness Is a Warm Saw -
Ppresident reacted to STOVE's post in the thread HELP! How to know when you have too much hook with
Like.
Latest hand file practice. Certainly room to improve. The husky roller kit is worth it for the raker gauge and flat file alone. These... -
Ppresident reacted to Squish9's post in the thread HELP! How to know when you have too much hook with Like.
That will cut OK. You can adjust things to suit the power and wood type you are cutting. A cutter like that will allow a little more...
-
PThe little fork just keeps the spring aligned.
-
Ppresident replied to the thread HUSQVARNA HUSQVARNA THREAD.T1, it prevents the spring from movement latterly
-
PIt might be, but seems kind of small to me, I guess the spring supports it and keeps it from bending when actuating the chain brake.
-
Ppresident reacted to Duane(Pa)'s post in the thread How many degrees timing advance MS 400? with Like.
Magnet gets to the coil earlier
-
Ppresident reacted to Outback's post in the thread How many degrees timing advance MS 400? with Like.
Spooky. Your backwards. The saw rotates counter clockwise when viewed from the flywheelside. You want to make the fly wheel go...
-
Ppresident reacted to huskihl's post in the thread How many degrees timing advance MS 400? with Like.
Hurting the power for that size wood, not hurting the saw. I would do what was mentioned before, somewhere between 6 and 8MM of...
-
Ppresident reacted to lehman live edge slab's post in the thread How many degrees timing advance MS 400? with Like.
So you haven’t done any yet you asked weeks ago already an I told you how to advance it and about how much using the fan blades on...
-
P.