president's latest activity
-
PIt might be, but seems kind of small to me, I guess the spring supports it and keeps it from bending when actuating the chain brake.
-
Ppresident reacted to Duane(Pa)'s post in the thread How many degrees timing advance MS 400? with
Like.
Magnet gets to the coil earlier -
Ppresident reacted to Outback's post in the thread How many degrees timing advance MS 400? with Like.
Spooky. Your backwards. The saw rotates counter clockwise when viewed from the flywheelside. You want to make the fly wheel go...
-
Ppresident reacted to huskihl's post in the thread How many degrees timing advance MS 400? with Like.
Hurting the power for that size wood, not hurting the saw. I would do what was mentioned before, somewhere between 6 and 8MM of...
-
Ppresident reacted to lehman live edge slab's post in the thread How many degrees timing advance MS 400? with Like.
So you haven’t done any yet you asked weeks ago already an I told you how to advance it and about how much using the fan blades on...
-
P.
-
POlder Honda tracked snowblowers have sparked my interest recently and naturally one wasn't enough. Bought the 80 and then the 55 showed...
-
Ppresident reacted to lehman live edge slab's post in the thread is STIHL the only one doing 4-mix and how does that make more power than 2-stroke? with Like.
If it’s the old fs-80 like the old fs-66 and fs-90 I have check to see where it’s made. If it says Japan like my fs-66 and my fs-90 with...
-
Ppresident reacted to lehman live edge slab's post in the thread is STIHL the only one doing 4-mix and how does that make more power than 2-stroke? with Like.
The Stihl 4-mix and shindiawa hybrid were co developed that’s why they came out about same time and Stihl/shindiawa both have shared...
-
Ppresident reacted to mrxlh's post in the thread is STIHL the only one doing 4-mix and how does that make more power than 2-stroke? with Like.
4 mix have more torque. New 2 stroke oil isn’t boat oil of the 60’s nor are the ratios.
-
Ppresident reacted to EFSM's post in the thread Trimmer Lines Breaking Off Inside Speed Feed with Like.
I'm not sure if the OP is still watching this, but I'd like to chime in. MAKE SURE THE INNER SPOOL ISN'T IN BACKWARDS!!! We've sold...
-
PThe larger jet may allow you to tune without having to defeat limiter caps.
-
PDoesn’t really matter as long as the adjustable jet adds plenty of fuel in addition to the replaceable fixed yet. Only difference...
-
PFunny I had to space out F A G because it auto corrects to “slacker” if you don’t. Thanks @dall
-
PI guess I’ll put this up for sale, as my wife is due with our second baby at the end of the month. I recently built this from pieces...
