president's latest activity
-
Ppresident reacted to bwalker's post in the thread Universal 2 stroke oil for all ratios, opinions? with
Like.
Above this post someone mentioned calcium sulfonate as being a corrosion inhibitor. It's really not. It's a detergent that happens to... -
Ppresident reacted to ammoaddict's post in the thread Universal 2 stroke oil for all ratios, opinions? with
Haha.
Yep. I was going to reuse an empty dominator bottle but the whole bottom was rusted out of it. -
PI finally found an IPL for that saw .Much to my surprise the list not only had a parts number but also a discription of the part .I was...
-
PI have taken a liking to the older saws in the 2/3 series. I have a few of the newer 5 series and I like them as well but have not had...
-
PThese will be drilled to accept modern chain catch rollers from Husqvarna and Stihl. The 27 49 dogs will be set to use Husky rollers...
-
Ppresident reacted to Woodslasher's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I think Stihl proprietary bearings are made by F A G typically, fwiw.
-
Ppresident reacted to sergiyshariy's post in the thread Chain Service Tools and Sharpening Station with Like.
-
Ppresident reacted to sergiyshariy's post in the thread Chain Service Tools and Sharpening Station with Like.
Perhaps the esteemed stihl #1 has friends in Germany who could tell me why the USG machines have a vertical shift of 3 degrees, which...
-
Ppresident reacted to HumBurner's post in the thread HELP! How to know when you have too much hook with Like.
This is how I often will deal with cutters that are rocked bad. Instead of making tons of strokes with the appropriate file, I'll grab a...
-
Ppresident reacted to old saw fixer's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I used to install the bearings on the crank first, the heat the pocket and drop the crank/bearing assy in. Put the gasket on that side...
-
Ppresident reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Ok I'll give that a shot. I realized I was careless when hammering on the crank, and damaged the threads slightly... smart guy! I'll...
-
Ppresident reacted to jacktheripper's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Only thing else I’d like for it is a new west coast style large clutch cover!
-
PPorted is the freebase form of chainsaw. You'll probably never recover. What model?
-
Ppresident reacted to lehman live edge slab's post in the thread SELLING Stihl 20" guide bar - Rollomatic ES - Made in Canada with Like.
Yes it’s an Oregon has the greasable tip also, I know for awhile there was some law stating all companies had to buy a certain...