president's latest activity
-
PI’ve seen the WJ41 on some early 066’s. Not a thing wrong with them. I have a friend that bought his red light brand new. His came with...
-
PThis is my baby she only comes out when someone "f" up love this 064 is it ported yep muffler mods yep base gasket delete yep will it...
-
PYeah, I hear you. I've done the same thing - get 'em minty and then sell for break even $ - with most of the 0 series pro saws - 020...
-
POEM piston finally showed up and I checked squish with no base gasket - .012" - too tight. The factory gasket is .019" so I could do...
-
Ppresident reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it. I gotta admit this... -
PThey are China made anyway. Ebay 501 51 61-02
-
Ppresident reacted to hotajax's post in the thread Trimmer Lines Breaking Off Inside Speed Feed with
Love.
Well the water thing seems to apply only to keeping the line limp. Like my brother's wiener. But the problem I'm talking about is the... -
PA little bit of grease will keep it from pinching.
-
Ppresident replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.T1, with a 325 wheel ,move the grind forward o the second pass ,to remove the gullet and achieve a 3/8 grind
-
Ppresident reacted to Philbert's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
If you keep repositioning the wheel and cutter, you can get close to a standard profile on full sized 3/8 pirch chain. Otherwise...
-
PSaw sniffers with a deviated septum and long covid.
-
Ppresident reacted to Philbert's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I am not a fan of the CBN wheels. I know that makes me an outlier. I did not like the finish I got with $100 wheels off Amazon. I...
-
Ppresident reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I'm content with these chips, .325 husky safety chain on a 550XP in a green doug fir that blew over a few days ago.
-
PWhen I have encountered this very problem, a little more rich on the low side and a little more RPM on the idle screw fixes it 95% of...
-
PI'd check fuel and air filter and look for any kinks in the fuel line. I sounds like the carb isn't pumping enough fuel at idle. Some...