Philbert's latest activity
-
PPhilbert replied to the thread Diagnosing tooth shape.One of the reasons I strongly recommend holding the bar / chain securely in a vise of some kind, and using both hands to guide the file...
-
PPhilbert reacted to AVB's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with
Sad.
Any particular reason why a M8-1.00 flywheel knocker won't dismount the flywheel? BTW I do have the 1110 890 4500 in the shop but can't... -
PThat is very similar to the Oregon.
-
PI just received a vise from Mike today, modified to accept my Timberline cutter when I choose to use it. I know I'm beating a dead horse...
-
PPhilbert replied to the thread Vintage Chainsaw Museum.Need sunglases! Philbert
-
PMike finally got a break from all of the cold weather emergencies and got started on installing the "boiler" today. This unit will...
-
PA few weeks ago. Yesterday. May be the oldest Husqvarna I have in the display for now. Mark
-
PPhilbert reacted to 59billy's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with
Like.
There's more than one way to steal a pig. -
PPhilbert reacted to jacktheripper's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
Costs less than a brass hammer and works every time: https://a.co/d/08t3jeoQ
-
PPhilbert replied to the thread Making my own flywheel pullers for Stihl equipment (and possibly others).Just saying that’s how I was taught by an experienced saw mechanic. Lots of ‘field expedient’ methods that people use. Some people have...
-
PPhilbert reacted to FederalQ's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
https://www.sawsalvage.co/products/two-in-one-flywheel-puller-tool-for-stihl-chainsaws-1110-890-4500
-
PPhilbert replied to the thread Making my own flywheel pullers for Stihl equipment (and possibly others).How I was taught by by STIHL dealer! Philbert
-
PPhilbert reacted to bwalker's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
A sharp tap with a brass hammer works as well as anything.
-
PPhilbert reacted to Wilhelm's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
Thank You for the ping, but I am not knowledgeable in terms of Stihl-anything. Looks simple enough to make unless You have to buy...
