Philbert's latest activity
-
PRailing is up for the stairs going up. The gate swings open and the hoist will be installed soon to assist in moving larger or...
-
PWhat do you call a paper airplane that nobody has been able to fly? ans. From day one, it's always been stationary. ;)
-
PI just checked my 36" Stihl bar .050 and a new .063 chain fits in the nose but not in the bar rails so that verifies what you just said...
-
PJergens are step blocks for holding odd shaped pieces on a machine table. And we still don't know what that handle is for. 🤣
-
PMost replaceable tips are universal for all width bars I think.
-
PThey are all .063
-
PI haven't stumbled onto a good number to start crossing from (Yet) or one that is .050/,058
-
PPhilbert replied to the thread WANTED Stihl Bar tips.Wonder if there are aftermarket suppliers? Maybe places like HL, Bailey’s, Madsen’s, Loggerchain, etc.? Philbert
-
PI have a Stihl Bar # 3003 000 9630 It is a 25" 50GA 84DL 3 rivet tip I found it in the scrap yard, Had a bad bend in it but now it...
-
PI have rebuilt approximately 60 saws since I first became interested in this hobby. Did not know about 2-strokes at all ! I have learned...
-
PPhilbert reacted to Lawless's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
I sharpened a very nice like new 91DL 3/8 chain I found in the “box o chains” I inherited from my FIL. It had a little rust in 2 places... -
PPhilbert replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.Some guys mentioned, over the years, profiling their depth gauge grinding wheel concave, to adjust height, and shape them, at the same...
-
PPhilbert replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.I often set my depth gauges with the grinder, for height, then round them over to the factory profile using a ScotchBrite deburring...
-
-
PI am always interested in unusual saws and attachments... I have a few examples of the earth augers (Super 33, 250, two man) as...
-
PStihl 12mm mount bar that came with a PS-7900 purchase, note the additional oiler hole drilled. I did not check whether it was needed or...
