pbillyi69's latest activity
-
I will tell you that I have never personally seen a two cycle oil clean up old deposits. And I have inspected with a bore scope. -
I am aware of all that and I have a vested interest in the stuff.. With that said believe me when I say that top Tier doesn't mean squat...
-
Very much so.
-
pbillyi69 replied to the thread What oil is best? and what ratio?.there is a chevron station by my house. i have never seen a chevron tanker there ever
-
pbillyi69 replied to the thread What oil is best? and what ratio?.gas branding is a total scam
-
pbillyi69 replied to the thread What oil is best? and what ratio?.i have friends that live in california by all of the refiners and the trucks go to which ever plant is make whichever gas that they need...
-
The fact that this thread has accumulated over 1000 pages without completely devolving into grunts and pointing is impressive.
-
pbillyi69 reacted to bwalker's post in the thread So what's the current two stroke oil favorite? with
Like.
Alot of those thick oils without a diluent will either not mix or seperate. All castor oils seperate in cold temps as well. -
pbillyi69 reacted to Wilhelm's post in the thread So what's the current two stroke oil favorite? with Like.
INA Super 3 , 15W40 At 25:1 it worked for decades in the one 40cc saw this household had, processing firewood logs and cutting whatnot...
-
This discussion reminds me of when I attended my first Kohler technical school at age 15. We were having all kinds of trouble right then...
-
pbillyi69 replied to the thread What oil is best? and what ratio?.if you but quality oil and good gas it will be just fine as long as you mix enough oil into the gas
-
With over 1000 pages I would bet at least 20x. But we all reach our own conclusions in our own time. Some people can take another's...
-
Same AM 372 muff...just drilled out the tiny pipe, made the hole bigger, welded on a deflector. Port-matched the inlet to the widened...
-
yes it is. Actually it's the loudest muffler-mod I ever build and I can't imagine to work with this saw for more then 1 hour. I guess...
-