pbillyi69's latest activity
-
^^ This^^ but keep the front bearing on the shaft and clap the bearing when bending. ( from my experience with RC motors ) The bend is... -
pbillyi69 replied to the thread simington grinder.once my garage is in an orderly fashion mine will be mounted to the wall too
-
Which is why mine is mounted on the wall.
-
Completely disassembled the motor, measured the run out of the shaft between centers on the lathe and used a press to straighten it.
-
pbillyi69 replied to the thread simington grinder.if i knew the rpm and hp of the motor i would just see if i could replace it for cheaper than what they want for them from the places...
-
Tipton Electric Motors has done well for us over the years. I have to say I struck out with them on some small 8 inch bin fan motors...
-
pbillyi69 replied to the thread simington grinder.how did you straighten them?
-
Or maybe it's better to say that it's a paid product advertisement
-
Warning- TL/DB Well, since I started it, maybe I can wrap it up. It's been a good 10 years since I did much with a chainsaw, and 15-20...
-
pbillyi69 replied to the thread simington grinder.i took the wheel off and measured against the arbor the shaft is bent for sure. they wont tell me at saw creek what the specs for the...
-
pbillyi69 replied to the thread What oil is best? and what ratio?.exactly
-
I've seen many of these wonder oils over the years. You really think some guy in his garage stumbled onto something big the oil...
-
I knew someone would mention this soon.. it worked out to about $120/gal delivered to me here in PA (expensive I did NOT buy) sadly...
-
Have anyone try this?
-
pbillyi69 replied to the thread What oil is best? and what ratio?.its 25 bucks a quart plus 12 for shipping 37 bucks for a quart of two stroke mix thats a little steep. like they said in the video the...
