millerlite's latest activity
-
Mmillerlite replied to the thread The unpopular opinion thread.I go through half a tank of oil to a tank of fuel in the hisky. But thats still a lot of oil going somewhere. Interesting about the...
-
Mmillerlite replied to the thread The unpopular opinion thread.I dont own a single strato saw. But if you keep it in the powerband and have a proper system (porting and muffler jive), saw tuned...
-
Mmillerlite replied to the thread Rich coming off of WOT.Ok so to the chainsaw chainsaw haters out there *cough cough* I got it out today and made a quick video: Its richer than optimal on...
-
Mmillerlite replied to the thread Rich coming off of WOT.I gotcha. The reason i did the second hole also, was because it was visibly larger than the other two, and it looked like it was drilled...
-
Mmillerlite replied to the thread Rich coming off of WOT.Works good. It does seem to like a little more fuel in the high and I can actually tune it now. Is there a way to post a video here...
-
Mmillerlite replied to the thread Rich coming off of WOT.Thats exactly what I did. With a punch and a hammer, peened the edge in a bit from the inside, then put a new welch plug in. On the...
-
Mmillerlite replied to the thread Rich coming off of WOT.I took a punch and folded the idle hole half shut and the same with the first transition hole. Beat a new plug in there and set the...
-
MHonestly I’d try another carb before I went too crazy. You know it is in the carb bc the old one works.
-
Mmillerlite replied to the thread Rich coming off of WOT.Im liking this discussion. My biggest problem in life is i always need to know why. Another carb might solve the issue, but why? What is...
-
MIt seems to me somewhere, in the case of the bigger carburetor, excess fuel (in comparison to a stock carb) must remain after the...
-
Mmillerlite reacted to Lone Wolf's post in the thread Stihl 200T - what is the best carb for it? with
Like.
He did test the engine for leaks already . "I was brought a 200T that "just don't run right." I ripped it apart and did a... -
Mmillerlite replied to the thread Rich coming off of WOT.Thats what I thought. And these are all good points. I have already checked all these things. Ive ran into carb issues before but not...
-
Mmillerlite replied to the thread Rich coming off of WOT.What should the pressure be? What is the effect of pressure vs lever height?
-
Mmillerlite replied to the thread Rich coming off of WOT.Pop off at 13 to 14 psi
-
Mmillerlite replied to the thread Rich coming off of WOT.Makes sense. Pop pressure i am not sure. I can test it later. For reference, on my mildly ported cs400 my settings are 3t out on high...