MG porting's latest activity
-
MG porting replied to the thread FOUND IT 372OE rear handle.Yeah I think somebody is is fibbing on how that broke lol it happens to all of us even the pros. -
MG porting replied to the thread Primary and secondary angle experiment.The only advice I can give you is to try not to make your edges to thin if you're planning on cutting hard wood but soft wood it will...
-
https://www.arboristsite.com/threads/zama-carb-mod-cliff-note-version.275905/ This works good, and easy to Modify
-
Ah, didn’t see that. China carbs are hit and miss.
-
MG porting replied to the thread 372xp carburetor ?.The carb that the saw came with is clone so not OEM I've tried low setting change nothing ones I get the new intake boot I'll pull both...
-
Why bother with the Chinese carb when you seem to have the oe working? Also, try opening up the lo screw a bit and see if response gets...
-
MG porting replied to the thread 372xp carburetor ?.It's new line I'm not worried about it I just put it on to eliminate the crap hose that they put on the saw I will be replacing it with OEM.
-
Swap that impulse line too, just waiting to fail. Echo line is the way!
-
MG porting replied to the thread SELLING Various parts/project saws mostly 0XX Stihls..I'm definitely interested in the ms440 when you get to it let me know what you want for it.
-
Yep. Pressure test 3 times and it still isn’t right. I’ve been there. That’s why I say middle bog is almost always an air leak...
-
MG porting replied to the thread 372xp carburetor ?.Well I put the Duke's carb back in and got it to tune but just wasn't quite right this carb is definitely jetted bigger than the old...
-
-
MG porting replied to the thread HELP! Stihl MS650 PTO bearing play.I forgot to ask is the bearing a plastic cage bearing?
-
MG porting replied to the thread 372xp carburetor ?.Yes and yes I've yet to put the Duke's carb back on but tomorrow it's going back in but today I had a chance to run the saw with the old...
-
It might break in. Did you pressure/vac test after reassembly? Do you have the super thin O-ring under the top hat?
-
MG porting replied to the thread HELP! Stihl MS650 PTO bearing play.Are you leaving the bar and chain on the saw when you're not using it and if you are are you loosening bar tension before you put it away??
