MG porting's latest activity
-
MG porting replied to the thread 372xp carburetor ?.Definitely a good idea if or when I take this jug back off. -
MG porting replied to the thread 372xp carburetor ?.I got it back together with new crank seals and cylinder resealed now the damn thing at first start will idle high and if you hit the...
-
The walbro carbs from FT seem to be OEM or as good. Get ‘em while they last! ^Exactly this. Bog mid throttle is almost always an air...
-
Get the jug slid on just past the rings and then tilt it out of the way and apply sealant. Standing it on the intake end, then on the...
-
Hey fellas, just want to update: Duke sent me a 3 pack of chains right after contacting me a few weeks ago, after my experience and...
-
MG porting replied to the thread 372xp carburetor ?.So I put the Duke's carb in today and now the saw is worse so put the other carb back on and all tho it runs better but I went ahead and...
-
MG porting replied to the thread 372xp carburetor ?.It's here looks good I'll probably put it in the saw this evening I also got new crank seals from the Duke's but doubt it needs them vac...
-
MG porting replied to the thread 372xp carburetor ?.
-
-
.050 and .063 presets can be wildly different between both same chain companies or different brands. Oregon probably shares many the...
-
I got a 50’ roll of the regular dukes chain, hopefully I’ll get a 36” and a 20” made up to run some this weekend. I will make a couple...
-
Speaking for rolls of Stihl and Husqvarna chain (I assume will be the same for Oregon, Archer and others), when you buy a roll, several...
-
Tri-link (Countryline) does not fit Stihl, Oregon or Husqvarna. Made the mistake of breaking a Tri-link chain for a customer and could...
-
Thanks! I bought a pack of 72 drive link chains, and I wanted to shorten one for a 69 link bar I have. The 72EXL straps I have should...
-
I’ve never found one brand that didn’t fit another My roll came with straps
-
I have this one...
