Maintenance Chief's latest activity
-
Follow-up on the pool cleaner repair: Replaced the servo motor and seal. Couldn’t get the motor to get past the self-test while on the... -
Or, an 020 :p
-
I found a 923 and a 955 but all I did was get them off the shelf
-
Well I’m back to logging for the season. I’ve been running my 20” bar a lot lately, and the Duke’s chains I have are for my 25” bar...
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Rather than tear the engine completely down again, I swapped the flywheel and starter shaft from an 850 that allowed the cover to fit... -
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
I put a note in the small parts bin with the dowel pins so hopefully I remember to check these in the future. I also noticed there are...
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with
Sad.
I was putting a PM800 together and learned a valuable lesson about the dowel pin (110851) used to locate the bearing insert on the PTO... -
Maintenance Chief reacted to lehman live edge slab's post in the thread MCCULLOCH The official McCulloch thread with Like.
I bought a tire tube to cut pieces out of for that on other saws. Didn’t realize but most tubes are butyl rubber now.
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
You might as well make those parts Chris, you will be needing them again for additional projects...
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Bottom line of the coil & flywheel testing: Points ignition (Mini Mac) uses "IGN" flywheel 91961/94513/94737,217673 Early brown &...
-
Maintenance Chief reacted to Max the Mac Man's post in the thread MCCULLOCH The official McCulloch thread with Like.
Went to Savannah to celebrate our anniversary, was representing at dinner...
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Sorry Ed, had your message prepared and never sent it, check your in box now. Mark
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Many of the black, SEM coils came to me mixed together, and in a few instances had incorrect part numbers on the boxes or bags. A few...
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Son Jeff and I spent some time yesterday trying to organize a mess of electronic ignitions for the small McCulloch saws. I wanted to...
-
Maintenance Chief reacted to fossil's post in the thread Funny pic's and gifs 2021/2022/2023/2024/2025 with Like.