Maintenance Chief's latest activity
-
The P50 sounds like it is ready...for almost anything. Mark -
A Pioneer P-50 left the bench and a Homelite 900D took it's place.
-
The exact idle speed is not that important. According to manufacturers, the most common tolerance for its setting is ±200 rpm, which...
-
Maintenance Chief reacted to FergusonTO35's post in the thread HUSQVARNA HUSQVARNA THREAD with
Like.
I have also found that when the chain is too tight it can stall the saw when you release the trigger. It's as if the extra tension can... -
Nice flat top
-
One of many standing dead elms to dump.
-
Pup keeping an eye on the BBQ
-
Maintenance Chief replied to the thread Trees you've cut.I use a bore/ plunge cut for forward lean trees or decay at the hinge area. I'd say that one cut for everything is not a good solution...
-
Back to storm damage today. Cut up a few fallen bog birche trees. The land owner brought his trailer to fill with chip. He's going to...
-
If it might chair, bore it.
-
It was fine, just didn’t swing as much as wanted.
-
Maintenance Chief reacted to FergusonTO35's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Got the 16" .043 bar and chain, thanks Sloughfoot!
-
Maintenance Chief reacted to hacskaroly's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Its probably there just to help keep you from snagging the wiring on something or just banging it with something.
-
Maintenance Chief reacted to FergusonTO35's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I'm really glad I bought this thing, I wouldn't be surprised if it still has dealership fuel in the tank!
-
Try ditching the canned fuel. Some of that stuff just doesn't have enough "pop" to it.