lehman live edge slab's latest activity
-
lehman live edge slab reacted to EFSM's post in the thread What? No bandsaw milling threads? with
Like.
That’s what I was envisioning too. However, simply setting the cant on its corner and using a speed square to find 45* seemed to work... -
lehman live edge slab replied to the thread What? No bandsaw milling threads?.No experience doing one but I’d imagine you would need a fixture to place on the bed to hold it accurately for at least the first cut...
-
lehman live edge slab reacted to Tor R's post in the thread Husqvarna 564xp (g) fuel inject with Like.
Buying the 564xpg wasn't my original plan, I wanted an upgraded 562, which came with the mark II. Since I'm a bit slow, the 564 was...
-
lehman live edge slab reacted to singinwoodwackr's post in the thread The mighty stihl 064 and early 066 with Like.
New build. Stihl needs tuning but cuts nicely. Early 066 flat top, no decomp, oe Am muffler, ported, dual port
-
lehman live edge slab reacted to K Mueller's post in the thread The mighty stihl 064 and early 066 with Like.
-
lehman live edge slab replied to the thread What? No bandsaw milling threads?.Yep 3600 all small engines make rated hp at 3600
-
lehman live edge slab replied to the thread Not so pros 4 new and without politics or drama.My sister lived in South Carolina for about 5 years and her coworkers always asked what all the little houses in that field were for...
-
lehman live edge slab reacted to Tor R's post in the thread Husqvarna 564xp (g) fuel inject with Like.
Husqvarna has had proprietary bearings since the mid 70's, first I know of is the 340SE/SG. Continued with that bearing on the old 40...
-
lehman live edge slab replied to the thread Husqvarna 564xp (g) fuel inject.I think every pro Stihl saw has had one proprietary bearing in them for as long as I can remember. Granted it’s usually just a common...
-
lehman live edge slab reacted to jacktheripper's post in the thread Not so pros 4 new and without politics or drama with Like.
That’s a 450. Just popped her off on prime yesterday. Should be for sale soon!
-
lehman live edge slab replied to the thread So what did you do today?.I have the ipls for them at home but that’s a newer one and if it’s electronic ignition it’s limited rpm by the coil. Same as the newer...
-
lehman live edge slab replied to the thread So what did you do today?.It will run the 08 is a tough ass saw, well will run and work long as you have all the parts.
-
lehman live edge slab replied to the thread Not so pros 4 new and without politics or drama.Looks like a bigger homelite lower right corner 450/550? Or is it smaller than that like a 350?
-
lehman live edge slab replied to the thread Not so pros 4 new and without politics or drama.They do make a drive in style seal for those so you don’t need to pull them down to change it but they cost about double a normal one at...
-
lehman live edge slab replied to the thread Husqvarna 2-in-1 Chain Sharpener.I’m sure this will work very well just like I think the 2 in 1 Stihl one works very well. I recommend the 2 in 1 all the time to locals...