lehman live edge slab's latest activity
-
lehman live edge slab replied to the thread How many degrees timing advance MS 400?.Just because even if not an issue better cooling won’t hurt. I believe the magnesium alloy piston transfers heat better to the cylinder... -
lehman live edge slab reacted to Outback's post in the thread How many degrees timing advance MS 400? with
Like.
Spooky. Your backwards. The saw rotates counter clockwise when viewed from the flywheelside. You want to make the fly wheel go... -
lehman live edge slab replied to the thread How many degrees timing advance MS 400?.Hi Scott, guess I can go a bit more than I am than.
-
lehman live edge slab replied to the thread How many degrees timing advance MS 400?.I do a 1/4-5-16” outside diameter which is what you did roughly on a couple 400’s and a bunch of 362’s for a tree service and the 362’s...
-
lehman live edge slab replied to the thread FOUND IT 026 Piston.I used a 036 techomec kit once just because it was so cheap on eBay as a clearance. Honestly was a very nice cylinder and has held up...
-
The piston/cyl is a 44mm. I spoke with @Stump Shot yesterday and I’m snagging a Tecomec kit from him. Thanks @drf256 and @lehman live...
-
lehman live edge slab replied to the thread FOUND IT 026 Piston.If it’s an 026 and all original should be 44, the 44.7mm happend into the ms 260 version some are 44 and some 44.7.
-
lehman live edge slab replied to the thread SELLING NIB/NOS Saws Husky 353, 61, 372 OE, 288 - Stihl ms361, ms381/382, ms660, ms070/720 - Echo cs1201.Not sure that will work I do believe the cases have changes to the basic design for transfers like a 362 and 400. Open port on 363 and...
-
-
lehman live edge slab replied to the thread So what did you do today?.So mahle didn’t make any of them in those years?
-
lehman live edge slab reacted to Max the Mac Man's post in the thread MCCULLOCH The official McCulloch thread with Like.
The Happy 250th Birthday America saw is coming together...
-
lehman live edge slab replied to the thread SELLING NIB/NOS Saws Husky 353, 61, 372 OE, 288 - Stihl ms361, ms381/382, ms660, ms070/720 - Echo cs1201.Not the new one that’s the old ms400 that’s based off the 362. Ms 363 is same displacement as a ms 400.1 that just came out but has...
-
lehman live edge slab replied to the thread SELLING NIB/NOS Saws Husky 353, 61, 372 OE, 288 - Stihl ms361, ms381/382, ms660, ms070/720 - Echo cs1201.Regular carb saw similar to a 400.1 but has different cylinder with less power. Believe it’s an open port version of a 400.1 basically
-
lehman live edge slab replied to the thread ECHO Echo, Echo, Echo.Well guess I’ll just keep these after I get them going since not really worth much.
-
lehman live edge slab replied to the thread ECHO Echo, Echo, Echo.Yeah seems to look like maybe the same saw with just a different displacement. Im assuming this one was a runner and did they have a...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.Be curious if your mod will do more gains than the typical connect the holes into a widened slot on the factory muffler set up that I’ve...
