lehman live edge slab's latest activity
-
Once you get the moisture out you might think of sealing it by using high temp urathane or Glyptal . Glyptal is red pigment shellac used... -
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.One of the 500’s came in with the inner felling dog off. Was a 500r and I’m assuming the thing came loose and they were using the spikes...
-
-
lehman live edge slab replied to the thread HOMELITE Homelite Thread.Really not much to damage in a regular coil, it’s just wire wrapped around a metal and composite core with epoxy. Low heat I don’t see...
-
It must have been a moisture issue because this morning it works. I don't know how long the oven actually stayed on, the coil was still...
-
Another thing many people have no idea it could happen is one of the flywheel magnets loose mgnitism .You can recharge them using a...
-
lehman live edge slab replied to the thread HOMELITE Homelite Thread.I’ll see if the ugly xl I have that my aunt gave me with the others has spark, I’m pretty sure it ran but has mag rot pretty bad and...
-
lehman live edge slab replied to the thread HOMELITE Homelite Thread.Yes if the coating is cracked baking it will remove the moisture which is shorting the coil internally. If you get the moisture out then...
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Mesh style winter filter on eBay for less than 20$
-
-
lehman live edge slab reacted to David Young's post in the thread Post up your ported cylinder Artwork with
Like.
it'd look better if you golph bawled the intake, put in the mickey ears AND if you really want to increase performance that exhaust is... -
lehman live edge slab reacted to huskihl's post in the thread Post up your ported cylinder Artwork with Like.
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Good luck, there’s a reason Stihl doesn’t really sell them separately and yes the face of the shoe where it rides on clutch wears just...
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Supposed to center the crank no matter what way you do the assembly, definitely don’t want the bearing loaded sideways and binding
-
lehman live edge slab replied to the thread Husqvarna 564xp (g) fuel inject.But the question on everyone on YouTubes mind is it fuel efficient? 🤣
-
lehman live edge slab replied to the thread HELP! Stihl 076 AV Super- Bogs and Dies When Hot.Probably wouldn’t hurt but I’m still leaning towards coil heating up, I think if the trigger gos it’s usually done but saws older and it...
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Even if the carriers are available separately why would you want them? The shoe assembly’s wear also not just the drum and springs. So...
