legdelimber's latest activity
-
Llegdelimber reacted to Junk Meister's post in the thread Not so pros 4 new and without politics or drama with
Like.
More than a few of us can Identify with you. That is very NOBLE of you .. Get your Ps' and Qs' together, Send a round trip ticket to... -
Llegdelimber replied to the thread Ms362 exhaust leak..EFSM. I smoothed out the sharp corners underneath the transfer caps and put a small bit of a "notch" in the transfer (4 port) most...
-
LHopefully someone doesn't start the truck at the same time. Most fellas' try to NOT Whizz in the wind :pancarta:
-
LNice urinal, I'd pi$$ into that!
-
LAnd I just broke the other gasket while putting it back together…. 😩 Guess I’ll be searching out another kit later 😔
-
Llegdelimber reacted to ray benson's post in the thread Tillotson HK carb parts list wanted with Like.
@old_sir_henry Haven't seen one like the HU line of carbs that you posted. This is all I can add. Could you post the 1975 service...
-
Llegdelimber replied to the thread Ms362 exhaust leak..Should I admit to having put muffler screws on a hot stove element, before screwing them in? Yes pliers and a couple of room temp...
-
L“Strip it out and then back it off a quarter turn” is a well-loved torque spec used by many.
-
Llegdelimber reacted to cgraham1's post in the thread Random pics (that you took) thread... with Like.
My ‘72 w/ 6.0 LS swap (I posted in the wrong thread earlier). I forgot how rough riding these old trucks are. lol… still needs a lot of...
-
Llegdelimber reacted to cgraham1's post in the thread Random pics (that you took) thread... with Like.
-
LScott aka 08F150 I believe. He was pretty much gone before 2019/2020 when I became active, and I haven't heard anything really since...
-
LAppreciate another picture confirming what I’m seeing!! We had this issue a few times last year and once this year. I’ve considered...
-
Llegdelimber reacted to Hulsty's post in the thread Makita exits gas equipment manufacturing with Like.
Most likely, cashed in for scrap, done it myself for plenty of large expensive manufacturing tools.
