Ketchup's latest activity
-
Ketchup reacted to crowslayer17's post in the thread Random pics (that you took) thread... with
Like.
Beautiful moonrise the last few nights. The picture doesn't do it justice. -
It's an expensive repair 😉👍 the profit will be small 😎
-
The flat top turned out to be a stunner. Truly a beautiful saw underneath all the grime. Turns out that the issue with the saw that the...
-
Got the top cover in the for 288. Had to helicoil a hole on the case for it.
-
Last winter one of my sons bought a place across from the private airport and crop dusting company. They fly a good sized fleet of what...
-
just finished setting up this casing & about to chew on it for a while. 6hr cycle time on this op. it weighs ~1700lbs, for reference the...
-
Attended a bent-shaft canoe paddle making class this weekend. Started with scraps of wood, and strips sawn from a 2 x 6 at Menards...
-
Ketchup replied to the thread 550 XP Mark II or MS 261.87 E-free is all we have here unless you go to the airport. There’s no oxygen either, so high octane just makes saws slower.
-
Ketchup reacted to FernGreen's post in the thread Best and Worst years of the 372 x-torq (aka what design changes) with Like.
Alright so here's what I found for design changes according to the factory service bulletins. Looks like most of them were implemented...
-
Picked this saw a while back. It was too good of a deal to pass up. But I could use the money to fund some other projects. All OEM...
-
As promised, I snagged these 254 and 394 carcasses, plus a 372 cylinder and carb, for $100 from a local saw shop. The 394 has a full...
-
Ketchup replied to the thread What's on your bench?.Depends what you’re doing. But both is the best strategy.
-
Maybe one of them,
-
What I actually think I need is a 254 and a 394. And I just so happen to know where two carcasses are sitting that I’m going to buy next...
-
To many good looking cutters in here. You can tell how well it worked by the wear on the underside