Recent content by KellyJackson

Would you possibly have any Seals or O-Rings for the Chain Oiler Pump for an Older Husky 65L Remaining

Could someone tell me the Thread size & Pitch of a Tomos Zmade L 65 Crank on the Flywheel Side?

Figured it out, The Threaded Rod in the Handle can only come out on one side of the Crank Housing (Left to Right) would you know the Tread Size &* Pitch on the Flywheel side of a 65L?

hey Keith: I have checked Several IPL's for 65 Model but I haven' t seen a Pin in the Top of the Handle where this Threaded Rod Goes Through however my Handle on the Top where the Throttle Lever is (Trigger) only has 1 Tang Sticking up where Must have 2 and it doesn't appear it has ever Been broken?

I have a Model 65 Husky TOMOS (Yugoslavian Manufactured) Saw as well as Several Swedish 65l & 0650 Model Saws. On Most of these Saws the Plastic Handle that Mounts the Throttle Trigger/Lever is Secured to the Rear of these Saw Bodies on the Top Part of the Handle Directly behind the Carb by 2...

Thanks for the Information & Pictures. Could you let me know if there is somewhere where i can purchase a Husqvarna Specific Colored Powder for Powder Coating, something similar to the Orange on my 1991 Model 55 Husqvarna

I Realize that there are AM Decompression Valve Assemblies however my Original Cylinder didn't have a Decompression Valve or Hole for one in the Cylinder Head. As I Purchased a New Aftermarket Cylinder and Piston Assembly the New Cylinder Head came with a Threaded Decompression Valve Hole/Port...

I know that the Pro's don't in a Lot of Cases, think that Painting or Powder Coating an a Couple Older Chainsaw is Sensible as I have Been Told by Some "Pros" that doing this is for People who are Glory or Shelf Chainsaw Inthuest's, That's Fine, Everyone is entitled to Think & Believe what they...

Wouldn't happen to have any 55 Parts would You

Definitely 40-55 Size Husky 55 Model c/w: Mag Body, Being Old School I Like the Old/Ancient Tomos L65 Model also

65L, 1991 Rancher and Practica Parts

does he Purchase any Husky Parts/saws?

could you please send me what you have for a Husky 55 as well as Pictures of Clutch Cover/Brake and what you are asking for it

Yes I did Find the Pin. Are any of thee Aftermarket Cylinders and Pistons of any Quality

Could anyone tell me the Rods or Wire Required to Weld/Repair an Old Huskey L65 and 0650 Prictica Cracked Clutch Cover. I'm sure it has to be Preheated but i'm not sure if Cover is Magnesium, Magnesium Alloy or Aluminum