Jusgunn3's latest activity
-
JFile or grind off the sharp points and run it. Besides, that looks like a flat top, no decomp and those are pretty scarce. The best 066...
-
JThat will cause nothing at all. It’s also on the cooler side of the cylinder.
-
JRun that puppy
-
JThis is a stock 066 cylinder I’ve received and the damaged that is done has left 3 broken fins what do you think is the actual effect...
-
JFor sale is my Mastermind 592xp. It's a big, well ported saw and performs as such. I've ran it with echo red armor at 40:1 with...
-
JJusgunn3 replied to the thread Saw builders chime in..I want one as well, have a 543xp that is going to get messaged by @huskihl but have heard its not as impressive as the 242xp…I guess I...
-
JGenerally speaking … Quads can give better flow , efficiency, scavenging and most importantly more power at “in the cut” rpm but are...
-
JDang. Gotta get a 242xp now.
-
JStihl splits the uppers, Husky doesn’t. Is one better?
-
JI don’t think it’s necessarily the quads that make more power, it’s the path of the air. The entire 5 series runs pretty decent with...
-
JIf quads are so much better why are many modern units duals?
-
JI gained 1500+ rpms in the cut by switching from a stock flocked 026 filter to a fine mesh 260 pro filter. I had to modify my top cover...
-
JJusgunn3 reacted to singinwoodwackr's post in the thread The Husky 42/42 special/242/246 thread with
Like.
Got my 246 all stripped down and cleaned, case mag rot repaired and case halves painted. Just need to reassemble. -
JJusgunn3 reacted to Sloughfoot's post in the thread Not so pros 4 new and without politics or drama with Like.
48 here. Playing winter again with a roaring fire and heat turned off.
-
JJusgunn3 reacted to jacktheripper's post in the thread Not so pros 4 new and without politics or drama with Like.
Just got done building this fence around the new stove to keep our little ones out.