jacktheripper's latest activity
-
jacktheripper replied to the thread Carburetor talk - fuel puddling.No spitback, two of the saws were very much altered, but professionally by @drf256 and @Mastermind and the issues go away with different... -
jacktheripper reacted to mainer_in_ak's post in the thread Carburetor talk - fuel puddling with
Like.
It is winter time and im surprised nobody hasn't mentioned the issues that come from cold weather ops. All Carburetors like warm air... -
I would like this thread to be useful to folks down the road. That being said, I think this is a great addition. I'm sure other folks...
-
If this clutters up Greg's build thread too much hopefully a mod can delete my post. But all of these builds are kinda his fault after I...
-
Around seven years ago I did a 350 build with no timing changes. I got rid of restriction in the cylinder riser, smoothed all of the...
-
jacktheripper reacted to Czed's post in the thread Not so pros 4 new and without politics or drama with Like.
Mornin' Finally got around to trying out one of the diesel heaters me and my niece bought a couple years ago We put it in my niece's...
-
Just out of curiosity, I wonder if there is any difference if you blip the trigger a couple of times before picking it up, if it would...
-
I have a theory, because the carburetor is set so lean at idle, the throttle plate is therefor closed too tight/much to compensate for...
-
I've experienced the same thing but it's caused by vibration.. Putting the saw on the ground it vibrate the carb and would idle richer...
-
Good question. I've had the same experiences and don't have a fookin clue. I don't buy the flat spot in the manifold theory though.
-
Interesting question...and from the sounds of it, I'm not going to say anything that you don't already know/haven't tried. Letting a...
-
jacktheripper replied to the thread Carburetor talk - fuel puddling.That is actually what I have been doing on a couple of saws in order to pick them up. The blips do work, and you can tell that it’s...
-
jacktheripper reacted to singinwoodwackr's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
I’m gonna try that.
-
I always get concerned when I see a first time post from someone under a want add..
-
Added some bling in the shop, Titan sign courtesy of Max. Mark