IffykidMn's latest activity
-
IIffykidMn reacted to singinwoodwackr's post in the thread FOUND IT Stihl .50 3/8 chain….does anyone here spin loops or know the cheapest place to get some loops??? with
Like.
Under .25/link. Husqvarna C83, comp... -
IFor an experienced builder such as yourself beating up on bigger saws is probably easy. Lackeys like me not so much. I think having...
-
IYep I understand that. I laughed at it when I said it earlier, but it was still real. Usually the firewood classes go every 10 cc just...
-
IIffykidMn replied to the thread No replacement for displacement!.At 66 I begrudgingly pull out the 088 with 42" bar about once twice a year for something exceptionally large and like you happily put it...
-
IIffykidMn replied to the thread FOUND IT Stihl .50 3/8 chain….does anyone here spin loops or know the cheapest place to get some loops???.Yikes I just looked and Stihl runs $ .52 per link and Oregon is .25-.29 My dealer "Saw Supplier" only handles Oregon but does offer $5...
-
IIt would be great if in such cases the old oil was put back in to see if it fixes the slipping or whatever other problems occurred...
-
II'm convinced that's probably all that's necessary. I had a good transmission guy tell me he's seen them start slipping after getting a...
-
II was doing some cleaning and came across 50 pieces of 45 Colt brass. Free to anyone who wants them in the lower 48. I'll sit on them...
-
ITwig tipper for @BIGTWIG
-
IIffykidMn reacted to Woodslasher's post in the thread Dealers Charge for Firmware Update?!? on brand new carb with Like.
I'll do ya one better, NAPA says employees can/should no longer do anything other than install wiper blades and even back when we were...
-
IIffykidMn reacted to Steve's post in the thread Dealers Charge for Firmware Update?!? on brand new carb with
Wow.
Auto parts stores do not do a free engine light diagnostic check. They pull a code and sell you a part. The never check any thing much... -
IIffykidMn reacted to dangerousatom's post in the thread Dealers Charge for Firmware Update?!? on brand new carb with Like.
Well I spent almost $100 on a new carb thats technically useless untill firmware is uploaded. While just about any auto parts store now...
-
IIffykidMn reacted to Nutball's post in the thread Dealers Charge for Firmware Update?!? on brand new carb with Like.
Does it really cost that much to build the software? I'm sure it doesn't take 10,000 programmers several months. 45min to update a saw...
-
IIffykidMn reacted to Hinerman's post in the thread Dealers Charge for Firmware Update?!? on brand new carb with Like.
You bring up a valid point. I know your profession so I understand your point of view. I think most people on here are used to being...
-
Ihttps://opeforum.com/threads/ms500i-my-way.33065/