huskihl's latest activity
-
huskihl replied to the thread HUSQVARNA HUSQVARNA THREAD.All the same -
Seems likely. But even then I'd be interested to know whether that was sales in terms of revenue or units sold. It's certainly...
-
Bore scope helps. The stupid easy-start divot is the annoying thing.
-
That was the method I arrived at too. But I never tried a 2511 due to that right angle port.
-
Kev thanks for sharing. We have a confirmed 2511 brake job gone bad, had to be fixed by a former admin. Two out of Two stepped outside...
-
Could be wrong as there are so many different types of machines out there, but it’s usually tools with long projections and there are...
-
huskihl replied to the thread RIP Saw 500i.No tips other than practice. I have old used scored pistons in every size that I slide up into the bore repeatedly and look for...
-
As someone with no CNC experience, I would not feel satisfied with that. However, centering the exhaust roof is something I struggle...
-
357 mods with some 2mm sheet
-
huskihl replied to the thread RIP Saw 500i.Ripsaw ports the 2511 cylinders on a CNC. Customer sent me one to compare to one of mine and improve upon it if I could. The exhaust was...
-
huskihl replied to the thread Dominator oil.I would assume he’s talking about gross annual sales
-
huskihl replied to the thread RIP Saw 500i.Too many people fall for the supposed “perfection and repeatability” with cnc. It’s a great idea if they actually found a good solid...
-
I think that the CNC porting idea is fantastic, but it should be implemented by someone who has become an expert first at porting using...
-
I'm kinda getting the feeling that the rs folks are about as popular as stihl 2 stroke oil on here
-
I think the verdict is out haha. I read a bit about them and its 90% negative, trying to be to commercial and quality goes down it...
