huskihl's latest activity
-
-
huskihl replied to the thread A LOOK INSIDE YOUR SHOP.Pics don’t do them justice. Can’t look at the bulbs as they are too bright
-
-
How cool is it that 8 years later, people are still getting good ideas from your posts? NGL, at least half my time here us reading old...
-
huskihl replied to the thread Oil questions....I’ll share it again for the guys that haven’t seen it. This is dominator at 32:1 in my ported 2153 after about 25 gallons of fuel. It...
-
-
Looking up the specifications of the referenced Dominator 2T oil, it‘s viscosity is listed in the US SAE 20 grade range so it should not...
-
And when the temp changes, humidity changes, altitude changes, load changes, oil ratio changes, fuel changes etc.
-
-
As have I, 32-ish on break in saws and 40-1 on most everything else unless it seems to be a extra hot running saw or its mid summer and...
-
huskihl replied to the thread A LOOK INSIDE YOUR SHOP.@59billy Forgot about this post. Thanks for the reminder. 8 years now without changing a bulb👍
-
huskihl replied to the thread Oil questions....4 ounces per gallon is 32:1. I said 50+ percent. It’s actually 53.8%. Seems quite right to me lol
-
Thanks! I didn't see this before my last post.
-
huskihl replied to the thread Oil questions....Depends on how you look at it. Going from 2.6 up to 4 ounces per gallon is 50+% more oil
-
huskihl replied to the thread Oil questions....I have run amsoil dominator at 32:1 in every saw I have ported in the last 4-5 years
-
Pre ignition and detonation are two different things and the valvoline article mentions this. Pre detonation isnt a thing. Its a...
-
huskihl replied to the thread Saw displacement classes.Yep I understand that. I laughed at it when I said it earlier, but it was still real. Usually the firewood classes go every 10 cc just...
