huskihl's latest activity
-
huskihl reacted to sevensandeights's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with
Like.
Slick tip - thanks! -
huskihl reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Genius idea!! Thanks!!
-
huskihl replied to the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421.Double up some duct tape the width of the inside of the bolts and pinch it between the muffler and flange. Do the same thing on the...
-
huskihl reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
I use washers, they evenly cover the oil seal and press it in equally, very simple process for people like me with two left hands and...
-
huskihl reacted to Only the Tony's post in the thread HELP! So where do we go from here folks? with Like.
Need to reopen hell's kitchen for some of this caterwauling.
-
huskihl replied to the thread HELP! So where do we go from here folks?.I guess my point was, how would you know where we go from here if you don’t know where we’ve been.
-
huskihl replied to the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421.Never thought about the washer idea. Solid👍
-
huskihl reacted to Duce's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
I agree. Have had to tap seal in place with deep well socket or small piece of pipe, then motoseal around metal flange. Have a few...
-
huskihl reacted to Shane¹'s post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
I like using a plastic McDonald's cup for putting seals in they are so thin and work great but the flywheel side has a good taper I...
-
huskihl replied to the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421.Like mentioned, the flywheel side isn’t so bad. And some clutch sides aren’t bad, depending on how the crank is designed. If there is a...
-
huskihl reacted to sevensandeights's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Thanks all - very helpful! Saw a video (from MattyO) of the pop can trick for the seal so might try that to prevent the lip from rolling.
-
huskihl reacted to jacob j.'s post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
If the seal on the PTO side is still in good shape and you've left the crank in that side of the case, then yes, you should not have to...
-
Voices were raised, names were called, tears were shed. Dramatic exits were observed. More names were called. A few hundred pairs of...
-
huskihl reacted to SawAddictedFarmer's post in the thread HELP! So where do we go from here folks? with Like.
I've been reading along and I agree with what the older guys are saying about new guys staying out. The only way to move forward in the...
-
You were well ahead in the polls, but when you threw your panties in front of the staff, your application was thrown into the wastebasket.