huskihl's latest activity
-
You keep taking advice from the weirdos on here you'll probably never touch one either. -
Yeah i never cared for the grey cover, always switched them out when they were new. This one is pending.
-
Great to hear,, have a 661 doing the same. Got the saw in a box,, I see they sell a kit,,, coil and fuel solenoid. Have a 261 that...
-
huskihl replied to the thread SOLD Husqvarna 346 new edition.I think they made the change at the same time. From what I’ve seen, at least. If an NE has a orange clutch cover on it, it was probably...
-
-
huskihl replied to the thread Saw Sniffers Annonymous.Ford 6.9 was the worst. Cat was always pretty good lol. Even Duramax
-
huskihl reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with
Like.
OK, so I got to test it. With the transfers done it gained torque and speed. It is now 4-stroking at 14k, and pulling 11.5k in the cut... -
My 201 has a standard carb. He he, no solenoid to deal with, only the *!#%$!!?& rev limited coil to bug me. Thanks to Kevin, I can now...
-
Had a stock 201 that did not have much run time on it and lost spark. Replaced the coil, nothing. Replaced the carburetor and checked...
-
huskihl replied to the thread MS201TC And Other M-Tronic Problems?.I had a similar experience on a 201. Idled high, wouldn’t idle on choke to do the reset. Replaced the white solenoid with a new one and...
-
huskihl replied to the thread Preparing to port first saw - which one, and what method?.I think everybody that has ever ported a saw has done it once or twice. I have cut the line I wanted and then smoothed it out with a...
-
huskihl reacted to jacktheripper's post in the thread HELP! LA (Idle Speed) Screw Problems with Like.
This is unfortunately not the issue. They are closing fully in the position they like to be in without binding.
-
huskihl replied to the thread Preparing to port first saw - which one, and what method?.It needs the transfers raised 4° in order to get those RPMs back.
-
Technically mine. Unless you count possession. Cause wiggs has it. lol.
-
huskihl replied to the thread HELP! LA (Idle Speed) Screw Problems.If the butterflies or screws have been dicked with, sometimes they don’t close completely. Or if they put the butterflies in backwards...