hacskaroly's latest activity
-
How much you charge for saw detailing these days 😆. -
Is the original 290 top end smoked?
-
Honestly, I wouldn’t replace the OEM cylinder with aftermarket if it isn’t bad. Do a timing advance if it doesn’t kick back too hard and...
-
A close friend of mine lost his father a while back. While clean g out the estate he found a ms-290 and was gracious enough to send it...
-
I did a 390 kit on a 310 a while back. On the flywheel after you file the key install and start the nut. You should be able to rotate...
-
hacskaroly reacted to redneckhillbilly's post in the thread Cold weather-cold starting 550 xp autotune with
Like.
I think these autotune saws take more a healthy pull to get them to fire up, if you have a bad shoulder and cant give it a healthy... -
I haven’t had any time to work on it. I’ve been sick since the weekend :(
-
make sure the shaft is clean before pulling the seal over it. no rust etc.
-
hacskaroly reacted to Max the Mac Man's post in the thread MCCULLOCH The official McCulloch thread with Like.
Better than rustoleum. Real good if you use an automotive two stage clear coat on it.
-
hacskaroly reacted to jacob j.'s post in the thread WANTED Husqvarna 385 or 395 throttle shaft with Like.
If you're feeding an 084 cylinder, I don't know that a small HS carb is going to move that much fuel and air. You could try adding a...
-
Well I had her up for trade and no bites so going up for sale. Just dont need saw this big 11/21 saw.. It is a very very nice saw. Any...
-
More and yes I did polish the muff cover. Attachments 20251218_105916.jpg 159.7 KB · Views: 3 20251218_110941.jpg 99.3 KB · Views: 3...
-
Last one Attachments 20251218_105641.jpg 243.7 KB · Views: 6
-
I’ve been through brand compliance training a bunch of times. The lawyers like us to capitalize it because it uniquely identifies it as...
-
Wildly successful. I started in Customer Service and we'd get people saying things like 'I'm missing a LEGO from my megabloks set' all...
