hacskaroly's latest activity
-
This is an Iowa tree that you can bet has been hit a time or two..................... -
Bad fuel cap causing vapor-lock ?
-
hacskaroly replied to the thread Need a little guidance.Try running it on its side and crack the fuel cap to see if anything changes.
-
Done. Mark
-
You jam it in a port or twist it up in your shirt.
-
Shirt. Sounds like you have experience with this
-
-
Ran a tank and half through the saw today. Forgot to bring my adjustment screw driver, it may be a little lean at the top end. But ran...
-
hacskaroly reacted to K Mueller's post in the thread The Official Craigslist & eBay Thread with
Like.
$800 for a nice 461R with a 28” Duralite isn’t bad! -
Just go easy for the first six weeks, then slowly back to normal
-
I think I'm mending quite well, just a little sore. I go back to the doc on the 22nd.
-
351 is basically a 353 with a 44mm top end. Open transfers. Magnesium case. If we're bringing up Jonsered, it would be a 2149
-
This feels like a good time to bring up: using aftermarket parts in this bottom end setup can really shake up a build. I've never...
-
Good callout on the AM parts thing and the slip fit of the bearings on the crank.
-
I personally would want to use a good new bearing with an aftermarket seal over a crunchy old oem bearing out of a part saw. If the...
