hacskaroly's latest activity
-
WT-391 -
hacskaroly replied to the thread Need a little guidance.Ok, since you have a WT, using this tool, you would look for the "WT" on the tool, then flip it down like this. The blue lines area will...
-
-
Yeah, I’m looking at the later model pioneers or subsequent Poulans like the p45, pp455 on up to the p62 or pp655
-
One could get one of the neotec 843 543xp clones for $140 with removable transfer covers and port the hole thing with a harbour freight...
-
Regarding my two restorations on the P-100's I haven't ran them long enough to even seat the piston rings since I did the work .
-
Regarding the p-100's I found that model easier to find parts for than the little 3 cubers ,500 and 5000 plus . .It did however take me...
-
hacskaroly replied to the thread WANTED Pioneers/Poulans.I was looking at some Pioneer 600 and 620s on eBay a while ago, they look cool and have glass bowls for the fuel. I am guessing these...
-
-
I have a 390 built by Scott and know his work is top notch. For my next built saw I’m kinda wanting to give @stumpshot a try just cus...
-
Either of the newest 90cc offerings will be more user friendly than a 395. If you’re running a 36” bar a lot, I would probably get one...
-
We're still having incidents where members are getting scammed - If you receive a DM along the lines of: "hello, are you still...
-
Can you tune a saw? If not, stop. If you can, can you braze or weld thin metal, or have a buddy…? If yes, gut the 391 muffler. Give it...
-
hacskaroly reacted to 16TAF's post in the thread 2025 Christmas Giveaway Saw MS390 - Boedy @ Empire Builders (Closed) with
Like.
That was my thinking too -
When did this forum get more trolls than Denmark. Your engine was probably exposed to old gas that you don't have the self respect to...
-
I made my own splitter tool for stuffer saws, it's ugly but it works. It bolts to the bar studs and pushes the crank out from the...
-
Clone…
