hacskaroly's latest activity
-
The tecomec was under $20 to my door and it improved the flow considerably, even with the deflector attached - You can run without it... -
-
I do see a Briggs logo in the casting. I'm gonna guess that Sears wasn't helpful...
-
Dug a little deeper. The engine is item #44 in the parts diagram, which is described as a Briggs 133412-0059-01. The carburetor part...
-
I have a box of 15 Winchester 3" rifled slugs I would like to give away to a youngster just starting out. There should be plenty to...
-
Thanks, head is still spinning a bit.
-
I’ve seen worse cylinders. Run some sandpaper over it and seem how much is aluminum transfer that comes off.
-
Flow-wise I would imagine it's a substantial upgrade. Even the Husqvarna "jungle" mufflers for the 2100/2101 are still somewhat...
-
It is a tecomec 090 muffler. Less restrictive than the stock muffler and gives a nice throaty sound. I do have the original muffler...
-
I've heard those are good mufflers but dang they look like a rollie pollie crawling out the engine. Not that there's anything wrong...
-
-
hacskaroly replied to the thread Husky 350.Congrats!!
-
Okay, cylinder and piston are out. I think the cylinder is f'd but I defer to the experts. It's a 45 with the dish top. This thing...
-
Just did a simple angle iron mount. The holes on the tecomec had to be enlarged slightly as the distance between holes was slightly...
-
the muffler looks to be from a stihl 090?
