hacskaroly's latest activity
-
German shepherds are prone to hip dysplasia and spine problems. Especially the showlines with the sway back lower rearend. I have two... -
May to October is TFL. I’m really disappointed.
-
Just to play devil's advocate, voice mail has always been hella unreliable for me on both my personal and work phone, and a missed call...
-
hacskaroly reacted to SawAddictedFarmer's post in the thread Bandit 18xp chipper smoking, won't start with
Like.
First off like you said I would take all load off. Then crank it and let us know if the plug comes out wet or dry. Can you tell us what... -
hacskaroly replied to the thread Ready for the winter.I don't burn that much, so mostly restock during the summer. I guess it would all depend on what you have going on and how bad cabin...
-
Well, got our first cold day today so I loaded the racks around the house and started our first fire. I have plenty to get us through...
-
hacskaroly replied to the thread Poulan 5020 wont re-start when hot.I guess one way to check is after running it wide open and then shutting it down, pop the fuel cap (release any pressure) and then...
-
Yeah, I have been thinking about the mixture. The saw runs great at wide open throttle. Do you think I should just richen the low end...
-
hacskaroly reacted to FergusonTO35's post in the thread Poulan 5020 wont re-start when hot with Like.
The 5020 is usually a good cheap saw like the 2000 series was. Buy yourself a Briggs & Stratton inline spark tester, its like 25 bux on...
-
hacskaroly replied to the thread is STIHL the only one doing 4-mix and how does that make more power than 2-stroke?.Zip tie or velcro strap. Will work in a pinch!
-
hacskaroly reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
I was putting a PM800 together and learned a valuable lesson about the dowel pin (110851) used to locate the bearing insert on the PTO...
-
I use regular unleaded at 40:1. Any 2 stroke oil I have on hand.
-
I wish I had more info for ya. I just cut firewood at my Northern Michigan property....nothing crazy. When I shut the saw off to rest...
-
Yeah, I figured a new saw just out of the box would be tuned and ready to go.....apparently not! 🤣
-
If there is a high adjustment, it is under a small plastic plug in the side of the carburetor body. The low adjustment is in the middle...