hacskaroly's latest activity
-
It's worth buying a good hook and you can handle the rest 😉👍 -
The Lisle tool is quite handy, but on a small seal like these I had to use the modified screwdriver first to create a little clearance...
-
Wj28b is sold
-
It does have an igniter. It’s a black box with 2 pigtails coming out of it. That’s what I’m also suspecting just wish I could pinpoint...
-
hacskaroly reacted to FergusonTO35's post in the thread How long to wait before tracking a deer (crossbow)? with
Like.
Gonna have to come back tomorrow, my eyes are playing tricks on me and every clump of grass looks like a dead deer! I'm about certain... -
hi all, am in need of some parts to finish a build and start a few others. First and most importantly, I need a 2094/2095 crankcase...
-
XL12 went through the shop this week, customer said hard to start and would not hold a tune. It only had 120 PSI compression and while...
-
hacskaroly reacted to edju1958's post in the thread MCCULLOCH The official McCulloch thread with Like.
I got the new rings for the PM55 yesterday from Mark (thanks Mark!) & I installed them on the piston today.I also put a new crank seal...
-
hacskaroly reacted to East/West CADaddict's post in the thread SELLING New, Never fired or gassed 572xpg with Like.
Brought this from a fellow member on here with plans on sending it to a porter. Received the saw and it was exactly what I expected...
-
hacskaroly reacted to East/West CADaddict's post in the thread SELLING New, Never fired or gassed 572xpg with Like.
-
Ok, thanks guys I didn't see a stop on the crank but will follow the experts and drive er on home.
-
At one point he had 4 plus some parts. Now he only has 2, one going to you and one going to me, so he will be Allis Chalmerless.
-
I believe it presses in till it stops but it has been a while since I put one of these together. You can see the change in shaft diameter
-
hacskaroly replied to the thread Husqvarna 55 worm gear issue..I have worked/rebuilt two 55s and that is correct, slide on the worm gear until it stops!!
-
I have a problem that so far I have not found a solution to, I am replacing crankshaft seals on a 55 rancher. I made a homemade tool to...
