hacskaroly's latest activity
-
hacskaroly reacted to Max the Mac Man's post in the thread MCCULLOCH The official McCulloch thread with
Like.
If you swap the rods by removing the rod bolts and swapping them from the old crank to the newer one keep in mind two things. A) the... -
hacskaroly reacted to edju1958's post in the thread MCCULLOCH The official McCulloch thread with Like.
I contacted the seller & he said there's no blue to the conn rod,the keyway slot looks good,& the bearings have "normal slop".I'm not...
-
Thanks for the input. What grit would you suggest using? The cylinder is in good shape. Compression is down to about 145 psi and I want...
-
A YT video would probably be your best bet for seeing how to measure squish. A search here may turn up something. Easier to do than to...
-
I hand hone with some wet/dry and dish detergent. Can start rougher but go to 220---->320 grits. Not too much you need to hone unless...
-
hacskaroly reacted to Jusgunn3's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Id go for the 400c if you’re a Stihl guy, plenty of power and not much heavier to carry around. Run a 24” for reach and you can handle...
-
hacskaroly reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The way I took your first post it sounded more like the average was 24" not 6-8" 261 with carb of choice will get it done.
-
hacskaroly reacted to jeffkrib's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Steep rocky ground, cutting mainly small stuff, the 261 is ideal. If you are mainly cutting 24" stuff then 60cc would be the go. You...
-
hacskaroly reacted to Bill G's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The 261is the best choice for the job.
-
hacskaroly reacted to lehman live edge slab's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
If majority are 6-10” cedars the 261 is plenty fine and a bigger saw won’t even seem that much faster honestly. Even a 24”+ won’t make...
-
hacskaroly reacted to dthieme's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I personally would consider the next size up saw if it's in your budget. The 261 is a great saw, but if you are cutting anything of...
-
hacskaroly reacted to Rallyeguy's post in the thread MCCULLOCH The official McCulloch thread with Like.
Hi Ed, I wouldn't do a piston swap either... I would remove 2 rod bolts and needle bearings and swap the rod and piston from your saw...
-
One of biggest pains in my back sides got me again .Husky 281 I've changed the carb ,changed all the anti vibes .the coil .Evidently...
-
hacskaroly reacted to ManiacalMark's post in the thread WANTED Husqvarna 2100/1100/2101 Pro safety HD wrap handle with Like.
I imagine if you call them they will make one. I inquired about of they would make one for an ms880 and they came out with one months later.
-
hacskaroly reacted to Woodslasher's post in the thread WANTED Husqvarna 2100/1100/2101 Pro safety HD wrap handle with Like.
They used to make them, a buddy has a n.o.s. 2100 wrap handle kit from them that he's hoarding.