hacskaroly's latest activity
-
hacskaroly reacted to Shane¹'s post in the thread WANTED Husqvarna 2100 brake handle, air filter cover with
Like.
After further inspection I may have the correct handle but need to know what the hardware and springs look like now. If anyone could at... -
This is true but not quite all the way true. The short answer here is EAB treatment is complicated. The slightly longer explanation...
-
hacskaroly reacted to 2old2messwithOPE's post in the thread HELP! Parts source for Robin NB211 trimmer? with Like.
Anybody know any long-standing Robin dealers who might still have parts on the shelf? (Just 4-5 years ago, I could get anything I needed...
-
Black locust poles, at least in my neck of the woods, will easily outlast anything else. If it's dead and dry before you put it down, or...
-
I agree, Locust is probably the best in the east that's abundant. Oak, cedar if it's actually cedar, Osage Orange, Bald Cypress.
-
Hello Does anyone have a Stihl FS80 service manual that they can send me? Thanks
-
hacskaroly reacted to edju1958's post in the thread MCCULLOCH The official McCulloch thread with Like.
I finished up on my latest PM 10-10 today.I went to take the old fuel line off the carb & it broke in half just by putting a pliers on...
-
hacskaroly reacted to cinci5's post in the thread MCCULLOCH The official McCulloch thread with Like.
Some old ads I came across
-
hacskaroly reacted to STOVE's post in the thread HELP! How to know when you have too much hook with Like.
I use a c clamp with a base plate. It’s screwed into a piece of 2x8 so I can bring it anywhere. I typically set it up on a stool so I...
-
hacskaroly reacted to Sloughfoot's post in the thread HELP! How to know when you have too much hook with Like.
All good advice. Something else you can do is put your file in a new chain. Just touch it up lightly going to what's there. Make note...
-
@EFSM - I simply made some additional adjustments to the L adjustment and it seemed to work O.K. I also showed the owner how to use the...
-
I suspect in this endeavor that the race in question be a prime factor in what does what. It could prove to be a tough challenge with a...
-
Greg that would be the specialty of our good friend Steve @Stump Shot . Maybe he can pull her out at the upcomming GTG. Steve's 372OE...
-
hacskaroly reacted to huskihl's post in the thread HELP! How to know when you have too much hook with Like.
This^. Sharper angles cut faster but don’t last as long. Blunt angles cut slower but don’t dull as easily. When your file is too low...
-
hacskaroly reacted to EFSM's post in the thread HELP! How to know when you have too much hook with Like.
I’d say that looks pretty good. If anything it’s on the aggressive side.