hacskaroly's latest activity
-
hacskaroly reacted to Vintage Engine Repairs's post in the thread Ms390 Potential Air Leak? with
Like.
Glad you found it. Note that there are 2 types of seals in the IPL, get the ones where you have to take the clamshell apart. The others... -
Yeah the crank centering isn't really a thing for most saws. Most of the time you just want to get your bearings positioned properly in...
-
hacskaroly reacted to Adirondackstihl's post in the thread Stihl 028 excessive flooding issue with Like.
The carb is definitely leaking. It’s not the welsh plug as I sealed that as a precautionary measure. Being a STENs kit, it is...
-
I'm not sure I understood you correctly. Is the lever flush with the body or 1.65mm below?
-
hacskaroly reacted to Adirondackstihl's post in the thread Stihl 028 excessive flooding issue with Like.
I picked up on that and he has removed the burr. the metering lever is flush with the body of the carb as depicted in the diagram
-
I would suspect that the carburetor is leaking through. Do you have the tools to pressure test the carburetor? If you changed the...
-
As far as I know, the seats are not available as a separate repair item. When I need one, I punch one out of an old carburetor and...
-
hacskaroly replied to the thread Stihl 028 excessive flooding issue.In the second pic, looks like you have a bur on your rocker arm, if so, need to file it flat, the diaphragm could be holding the rocker...
-
-
It fires every other upstroke, just like a regular 4-cycle engine. The mix part means it takes mixed fuel. That's how they get the name.
-
Does anybody know what Stihl tool 4282 890 2700 is used for? And then, correct me if I am wrong, I assume that a 4 mix engine fires on...
-
hacskaroly replied to the thread Is my Stihl FS111R running hot or not?.
-
hacskaroly replied to the thread Is my Stihl FS111R running hot or not?.That is a piston stop, can be used to prevent the piston from cycling while trying to to get the clutch or flywheel off.
-
hacskaroly reacted to Rallyeguy's post in the thread MCCULLOCH The official McCulloch thread with
Haha.
Any time I have a 50/50 electrical connection option.....There's a 95% chance I get it wrong ;) -
Thanks for the info about the overheat protection or lack thereof. In that case it might be the ignition coil going flaky at a certain...
-
Update on the 440 In great condition
