ferris's latest activity
-
Snow dampered my time and will damper finding a suitable test log. Finished the jug, timing advanced. Did a little mod on the air... -
104.5/118/120
-
I widened the exhaust to 32.5mm, which is 65% of bore. I use paraffin wax and a lube for cutting the uppers.
-
Good morning. Jug done. Onto the mufkin after the day job. The exhaust port has some plating and a Husky-Esq groove outside the port...
-
Here’s a good view of where I’m working: 2 more Black Walnut trees (18” DBH/ea) over looking the valley below with the South Fork...
-
Those are Flitch Savers - they are plastic and the mill can saw right through them. I throw a couple in the butt’s of the high grade...
-
One thing to remember, is that the 3/8lp sprockets are larger than the same pin sprocket in standard 3/8. So a loss in torque should be...
-
My brother has one, it is stock, and he loves it. My ported 261 is my favorite small saw (with 18" 3/8).
-
Howdy fellas, been a while. Been busy too, which is a good thing!
-
But don't worry. 400.1 is much simpler:))
-
This is how I did many of them without a problem.
-
ferris replied to the thread The Stihl MS241 Thread.I know an old thread, but I want to share some information. I love the small saw for small felling and limbing jobs. Since new i was...
-
ferris reacted to Loggernate's post in the thread The forestry and logging pictures thread with
Like.
-
Thank you Kev. I will show pictures of it relieved as I go forward. Time has been the biggest hindrance for me. Hoping to get final...
-
Tiny pointed and/or flat burs. It’s not crazy important to have it perfect, it just can’t be high. I try to make certain I’m at least...