ErnieG's latest activity
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
A portion of my girls are out for hopefully some gymnastics today PM after work. PS-9010, PS-7900, PS-7300, PS-6100MMWS, PS-550... -
hi all, am in need of some parts to finish a build and start a few others. First and most importantly, I need a 2094/2095 crankcase...
-
Hi guys, My usual chain supplier sent me a free new chain. Peak Industry, probably built in china. Freshly filed, I tried it today...
-
ErnieG reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Usually, when leaking at the elbow the culprit is the suction line inside the oil tank, number 038-245-020, because it seals the tank's...
-
ErnieG reacted to Squish9's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Looks like I can get both lines here for around $36AUD for the pair so I'll order them today I'll put a post in the video thread of it...
-
ErnieG reacted to Squish9's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Thanks, I will order both and give it a birthday present Might as well just add a pic of what it was doing on the weekend
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Got a carburetor on the way to try ...I really hope it's that otherwise I don't know where to go after that ! Ernie
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
You need the third version! 🤣
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I have two different intakes and the same issue ...I don't think it's that's Thanks Ernie
-
ErnieG reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
The early 6100 had problems with the intake hose. I don't know if it may apply to you. The first intake hose version had number...
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I can try that .. Brand new bulb and lines/filter Ernie
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I may still try run her WOT, short burst, without the muffler. Let her warm up with muffler on though. Use really good ear protection if...
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Mufflers wide open ...I checked that a few times to be sure . Ernie
-
ErnieG reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Worth checking for sure I had a 9000 through me for a loop with a plug muffler took me a bit to figure out that one
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Muffler flowing free? Just a thought.