ErnieG's latest activity
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Flywheel should be fine as long as those gouges do not protrude. Still carb, just worn out at a bad place causing trouble? I can't... -
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I didn't swap the carb as I don't have a donor..I'm gonna have to find one somewhere! I'm definitely deep into this one but I'm not...
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Back to the ea6100... I was able to source a entire block with good crank and got it all assembled but still having the same throttle...
-
-
I just put the new decals on my 670 yardsale find
-
No free saws in Croatia, no free anything really! Seller wants money for the molten carcass.
-
Those ones are worth the gamble if they're free.
-
There is a poor EA6100 on FBM right now calling my name to salvage her. Two miserable pictures attached to the ad, description says...
-
I avoid burn victim saws. Good chance some or all of the metal parts are ruined.
-
Hey @hacskaroly , wanna come to Croatia for some saw tinkering, Eastern European food & drinks? 🤔
-
My primary PS-7900 is loosing all oil under her clutch, needs new oil pressure line which I have several! I have a secondary PS-9010...
-
I have a PS-5105H, running condition but not fired up since I purchased her. Something is very wrong with the piston as the ring gap is...
-
I have a PS-460 (corrected, not a PS-4600 Speed, those are functional, I have two "460's") that has never in my ownership had a B&C...
-
Any of mine comes up with a minor issue that is easy to repair (oil pressure lines, A/V mounts) I buy another running saw ...
-
That is where I run into issues, I get a parts saw and then I start rebuilding it...
-
That!!! Complete, assembled parts saws are Your best bet. Unless it is a fried or crushed parts saw there is a big chance that what...
