High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

EFSM's latest activity

  • E
    EFSM replied to the thread Echo Carb Limiters Question.
    There are no springs on modern adjustment needles. There is a plastic insert either in the carb body or in the screw to act as a lock.
  • E
    EFSM reacted to 4CornersPuddle's post in the thread Echo Carb Limiters Question with Like Like.
    Thanks for these last tips. I won't dumpster dive; I'll put a piece of tubing around the tuning screwdriver. Great idea.
  • E
    EFSM reacted to THE Compressor Guru's post in the thread HELP! Compressed air gurus with Like Like.
    Hi Just joined this forum recently. I can answer a lot of your question, my first question is did you accomplish you compressor build yet?
  • E
    EFSM replied to the thread Broken piston crown (Echo CS-7310p).
    No, the 620s have an offset pin so there’s no way to do that. The 7310’s have an enclosed pin so there’s is no up on the rings.
  • E
    EFSM reacted to Sloughfoot's post in the thread HUSQVARNA HUSQVARNA THREAD with Like Like.
    Couple summers back, one of those cats working a grass fire outside town commandeered a fire truck. A big one.
  • E
    EFSM replied to the thread What is it?.
    We’ve broken 3 or 4 in a couple hundred hours of operation, so I wouldn’t say it’s excessive. The mill is portable, but we have a dozen...
  • E
    EFSM reacted to sawnami's post in the thread Missouri-Built Saws with Like Like.
    Took some of my Missouri-built saws and made a dedicated wall. (Left to right) Top Row : Mono 1-16(77cc), Mono 60-20(77cc), Mono...
  • E
    EFSM replied to the thread Broken piston crown (Echo CS-7310p).
    I didn’t measure, but it wasn’t too bad. The worst cases I have seen are concrete saws (where the skirt can wear through) and a pair of...
  • E
    EFSM reacted to Mad Professor's post in the thread You Ham Fisted Nut ! with Like Like.
    They built Stihl 500 as nice, as an 009........ Yep 009. My 009 had cheap s/t screws in the muffler which failed, stripped out and...
  • E
    EFSM replied to the thread Echo Carb Limiters Question.
    The needles stay in place just fine with them off, but due to how small the needles are it can be hard to line up a flat screwdriver...
    • IMG_0985.jpeg
  • E
    EFSM replied to the thread Broken piston crown (Echo CS-7310p).
    The cylinder and roof are perfectly fine. Other than the plating getting thin beside the port where the loose piece of aluminum was...
  • E
    EFSM replied to the thread What is it?.
    How much is it worth? I might be interested. I wonder if welding broken blades is worth it, or if they are about to break somewhere...
  • E
    EFSM reacted to Sawdust Man's post in the thread What is it? with Like Like.
    Interesting, thanks for sharing. I've never attempted to weld a blade, just buy em in bulk for the sawmill. Like so......
  • E
    EFSM replied to the thread 2nd Gen Ram Pickups.
    Apparently there are some issues with the hydraulic valve lifters. There are kits to change back to the old mechanical tappet style.
  • E
    EFSM reacted to mainer_in_ak's post in the thread WANTED Lewis Chainsaw Winch with Like Like.
    Yep a 2172 as well. Half a decade and a half dozen worn out cables, still pulling good.
Show older items
Top