EFSM's latest activity
-
EEFSM replied to the thread So what did you do today?.Maybe you can tell me how to get a little old Poulan top handle saw to oil. It’s one of those with a screw-in check valve behind the...
-
EEFSM reacted to lehman live edge slab's post in the thread Stumped on Stihl BR450 Blower Stopping with
Like.
Just stating for all that was spent between an aftermarket carb and then the oem kit to rebuild oem carb after trying the amazon set up... -
EEFSM replied to the thread Stihl 361 Leaky Carb.Are you saying that it leaks from .5 bar to nothing in 10 minutes? Or that it takes 10 minutes to show leakage? I think I’m...
-
EEFSM replied to the thread Grinder Comparison Thread.We bought the machine from Stens and have always ordered the OEM wheels, which are a unique size.
-
-
EThat's interesting; it seems to me that my CBN wheel produces less heat than the pink Oregon-type wheel. What material are the Franzen...
-
EEFSM replied to the thread Husqvarna 564xp porting.?!?!
-
EI get it, but I'm so used to the outboard style that it's nothing. The brake parts all in the clutch cover sure is nice too.
-
EEFSM replied to the thread Carburetor talk - fuel puddling.I have seen Walbro’s black rubber check valves swell and plug the nozzle due to ethanol exposure, but I can’t recall ever having issues...
-
EEFSM replied to the thread Stihl 361 Leaky Carb.This is very good. Are you using a black rubber pump diaphragm or a tan Mylar one? The boot seal has nothing to do with the “impulse...
-
EEFSM replied to the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?.I leave the hackberry for the squirrels and woodpeckers.
-
EEFSM reacted to I saw a lot's post in the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread? with Like.
I did make it out to the country and ran the 550xpg for a bit. Got a load of hackberry, hopefully it has enough BTU's left to be worth...
-
EEFSM replied to the thread First time modifying a cylinder.I would be afraid of it coming loose.
-
EEFSM replied to the thread Husqvarna 564xp porting.Thanks for everything. So this is a strato EFI engine, unlike the MS500I. That is definitely a Tsumura bar, which is interesting because...
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.Did you change the intake gasket? Was the pulse hole for sure at the same place?
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.Agree 100% Aftermarket carbs are more hit than miss in a primered setup.
