EFSM's latest activity
-
EEFSM replied to the thread First time modifying a cylinder.I would be afraid of it coming loose.
-
EEFSM replied to the thread Husqvarna 564xp porting.Thanks for everything. So this is a strato EFI engine, unlike the MS500I. That is definitely a Tsumura bar, which is interesting because...
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.Did you change the intake gasket? Was the pulse hole for sure at the same place?
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.Agree 100% Aftermarket carbs are more hit than miss in a primered setup.
-
EEFSM reacted to lehman live edge slab's post in the thread Stumped on Stihl BR450 Blower Stopping with
Like.
I see eBay had new oem carbs for 81$ so between the aftermarket Amazon carb then kit then other oem parts I’m sure a new carb could have... -
EEFSM replied to the thread SELLING 031 Parts lot.That looks like something slid onto the crankshaft, not like part of the clutch.
-
EEFSM replied to the thread Stihl 361 Leaky Carb.How fast is it leaking? How many seconds from .5 bar down to .4?
-
EFinished the 026 wrap up this morning.
-
EEFSM replied to the thread SELLING Stihl 036.Hang tight, @Bill G will be around soon.
-
EEFSM replied to the thread Stihl 361 Leaky Carb.Normally a leak there means a perforation in the pump diaphragm.
-
EThat‘s the impulse circuit. Did you change out the pump diaphragm?
-
EI also have a winter $hitter so I don’t care what happens to it I would never use a new vehicle in the winter, I just don’t have that...
-
EEFSM reacted to Wilhelm's post in the thread So what's the current two stroke oil favorite? with Like.
INA Super 3 , 15W40 At 25:1 it worked for decades in the one 40cc saw this household had, processing firewood logs and cutting whatnot...
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.Does the primer bulb fully fill with fuel?
-
EEFSM replied to the thread Stumped on Stihl BR450 Blower Stopping.It’s not on that diagram; it’s possible yours doesn’t have it. Stihl uses them fairly randomly. It is in a blind hole drilled above the...
-
