EFSM's latest activity
-
EEFSM reacted to Powerstroke Cowboy's post in the thread Any Chinese chainsaw and chinese parts discussion with
Like.
Must be a beaver of a saw!! -
EEFSM replied to the thread Forester double bevel square files. quality?.Why would they? We buy the Chinese stuff, it turns out to be junk or at least counterfeit, we grumble a bit, and go right back to buying...
-
EEFSM reacted to singinwoodwackr's post in the thread Interesting deal...Shindaiwa 750 protype with Like.
Here is possibly a transition cyl. The larger transfer ports were epoxied to close to the production specs.
-
EEFSM replied to the thread Interesting deal...Shindaiwa 750 protype.I really dig that angled tunnel one. Never seen the likes.
-
EEFSM replied to the thread Milling questions from a newbie.If you cut a board with the pith (center of the log) in it, it will almost certainly crack in half. It would be a lot better to take a...
-
EI was searching for parts to add a chain brake to my L86 Jobu and found this site. I bought the L86 new in 1979. Several friends had...
-
EUpdate: @buckin-wood - I used your idea here on modifying a 562xp nozzle, and it worked great! I've ran a couple tanks through it now...
-
EEFSM replied to the thread porting 359husky.If you’d cut the base and squish a bunch you might still be able to make that work.
-
EEFSM replied to the thread Spinning up odd count loops.Are you using a different size anvil for LP chain vs big 3/8? They require a different size.
-
EHere's my 300 BlackOut platform. Well, not this exact gun but very similar to this, no pics of that specific gun on my phone. 10.5"...
-
EEFSM replied to the thread SOLD Two .404 Loops.Put them on a bread and water diet for a week. That should do it.
-
E@MustangMike, what you were saying in the Muffler Mods thread is definitely worth thinking about. I quoted you below for a little...
-
EThe gizmo is a fuel tank vent, to prevent a vacuum forming in the tank when the fuel level drops. The symbols are summer and winter...
-
EEFSM reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
Also, I’m at roughly 6000 feet. So that 150 psi comes out to roughly 176 at sea level
-
EEFSM replied to the thread HUSQVARNA HUSQVARNA THREAD.That looks really good. Here is a picture of what your username can do. This is my dad and the deer he shot yesterday with a CVA 300...
-
