EFSM's latest activity
-
EEFSM replied to the thread 2023 ZAMA service manual.Right on, man.
-
EThanks I'll look into it. I ended up just using straight beeswax and a heat gun and am quite happy with it.
-
EEFSM replied to the thread $200 logger boot shootout.This stuff melts at body temperature so your fingers will melt it right into the leather. You can buy this at retail outlets so you...
-
EEFSM replied to the thread $200 logger boot shootout.I know this is a month old, but I’ve used Obenauf’s beeswax based leather preservative for years and it is really good stuff. It was...
-
-
EEFSM replied to the thread HELP! Need help with a Holzfforma G366.To find air leaks, you can use some kind of flammable cleaner or ether with a straw to check for leaks by spraying it on the suspected...
-
EEFSM reacted to jblnut's post in the thread Hydraulic “Limbsaw” for tractor or skid loader with
Like.
It’s not really a gas shock of any kind. It’s more of a pipe with a shaft in it that limits travel. The cable is there as a secondary... -
EEFSM replied to the thread What is a good price for a used 372xp and what to look for.I don’t have much experience with the 372 OE but have much more with X-torq. They run very well but are devastatingly hard on the...
-
EEFSM replied to the thread Hydraulic “Limbsaw” for tractor or skid loader.Does that gas shock limit the down force you can put on the chain?
-
EEFSM replied to the thread Requesting Carb Help - Echo 225 Trimmer.If there is a numeral 1 in brackets on the top of the coil it is the most recent version that has been upgraded.
-
EPhilbert
-
EWhat I mean by one-one-thousand is to say that out load to approximate one second of elapsed time. Sorry that wasn't clear, so pull the...
-
EEFSM reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
Making progress on the 272xp. I decided to do it all the right way. Base and squish cut with a buddy of mine. Took .040 out of the...
-
EEFSM replied to the thread Requesting Carb Help - Echo 225 Trimmer.When those coils fail, they cut in and out or totally lose spark. Something on the circuit board had a faulty connection, but it didn’t...
-
EEFSM replied to the thread 2023 ZAMA service manual.How long did you work for Stihl?
-
EEFSM replied to the thread 2023 ZAMA service manual.The o-ring needs to be slid up above the rotor into a little groove if it’s like the normal Zama RB carbs
