EFSM's latest activity
-
EEFSM replied to the thread FOUND IT Husqvarna K760 Intake.Go OEM. That’s one of the most critical components on the saw. I just rebuilt a 1 yr old K770 that self-destructed due to a broken pulse...
-
-
EEFSM replied to the thread 2023 ZAMA service manual.That is your problem. Replace that needle and you will have your adjustment working again. It is an extremely soft metal (brass alloy)...
-
EEFSM replied to the thread 2023 ZAMA service manual.Let me see if I can avoid the TL;DR disease. If this is a high hour machine it might have a worn low mix needle. I have seen that one...
-
EEFSM replied to the thread Echo 3020 Handle.It doesn’t matter which is which.
-
EEFSM replied to the thread Rigging a pulse to test a fuel pump.Actually they work better at cranking speed (a couple of pulses per second) than at full throttle.
-
EEFSM replied to the thread Rigging a pulse to test a fuel pump.If you have a pressure tester, make sure that the pulse fitting holds vacuum or pressure. Also the outlet should hold pressure and the...
-
EEFSM reacted to Ketchup's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with
Like.
That seems like part of it. Weight savings. The 564 literature says less vibration and slimmer case. That may also mean less case... -
EEFSM replied to the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube".Why are the new saws going short stroke? That makes sense on a 4 stroke (more room for valves) but a long stroke on a 2 stroke engine...
-
EEFSM replied to the thread SELLING Makita 6401.Yes, I can vouch for him. Great person to deal with.
-
EMine just locks on 13900.
-
EEFSM replied to the thread Rigging a pulse to test a fuel pump.Most lawn mowers have fuel pumps like that. You could use a lawnmower engine to test it.
-
EEFSM replied to the thread FS94 carburetor part number.This is a non-serviceable check valve and retainer. You will need a replacement pump body assembly.
