EFSM's latest activity
-
EEFSM replied to the thread Cedar logs.How big are they?
-
EEFSM replied to the thread WANTED CS-590 muffler.Get one off a 620. Way more flow.
-
EThe ‘ring test’ should be a basic step when mounting any grinding wheel. I had a small (4”) grinding wheel explode once, when I was...
-
EEFSM replied to the thread Landing Saw Sharpening, Lil' Help Please!.My grandpa started our shop as a sharpening service in the early 80s. Ever since, we have sharpened all manner of tools with all manner...
-
EEFSM replied to the thread HELP! Stumped on Stihl TS420 rewind starter.Try pinching the clip shut some to put more friction on the shaft. Remove any lubricant from the recoil too; it makes an abrasive sludge...
-
EEFSM replied to the thread Stihl NGK spark plugs vs. any ol NGK spark plug?.We have sold and installed many thousands of NGK plugs over the last 10+ years and have never had a problem that I can remember with...
-
EPhilbert
-
EEFSM reacted to lehman live edge slab's post in the thread Landing Saw Sharpening, Lil' Help Please! with
Like.
Also need to grind with little bursts so you don’t heat up or discolor the tooth -
EThe metal smear will hang off the edge of the port like a tooth on a crack head.
-
EEFSM replied to the thread Landing Saw Sharpening, Lil' Help Please!.If the burr is more than what you can scrape away with your fingernail, then the cutting surface is overheating. If you have access to...
-
EEFSM replied to the thread HELP! Parts source for Robin NB211 trimmer?.We used to be a Robin dealer. I’ll look to see if we have anything. I’ll try to get back to you this weekend.
-
EEFSM replied to the thread Echo SRM-2620T.Where is the plastic stuck onto the drive cable? If it is at one of the ends, it could be that the little rubber plug at the end melted...
-
EEFSM replied to the thread ECHO Echo, Echo, Echo.I’d probably set the idle at 2800 RPMs.
-
EEFSM replied to the thread What Stihl trimmer should I get?.Could you elaborate?
-
EEFSM reacted to srcarr52's post in the thread HELP! Help with first time porting Echo 800P with Like.
Thanks, I use 3/8" diamond ball in a #28 handpiece. https://www.mcmaster.com/4490A49/