Duce's latest activity
-
In public yours supposed to try to get away and on your property it needs to be your house and a threat of bodily harm way what I read... -
Nice it theory but spending years in jail over 2-3000$ in stuff probably not the most fun.
-
I always put a very thin layer of motoseal on both sides of crankcase gaskets. I’m sure it’s not necessary but I figure that everything...
-
I use motoseal for base gasket delete
-
A compression test will rule out or help confirm a stuck valve, if you have a tester or can borrow one.
-
Duce replied to the thread 372 sputters when tipped, passes spray test.372's oe or xt are easy to tear down and do complete rebuild. Clean every part, check carb screen, check bearings, base gasket (had one...
-
Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...
-
I put a light film of motoseal on all those contact points Never had a leak.
-
That is where I run into issues, I get a parts saw and then I start rebuilding it...
-
Was out back Saturday found a new pile of Ash the wood fairy left sometime last week. Most of the diameters are over 16" and the bulk of...
-
Randy, my dear neighbor, 2 miles over the hill can hear Steve's @Stump Shot 372 darling dancing away. Puts a Big 'O stupid smile on my...
-
Duce reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with
Like.
Yes…but I’ve only had it a few months, and I keep em in the AC with e free fuel. @afleetcommand suspects the PTO bearing/seal as it’s... -
I'll probably wait until the 200 year anniversary saw is launched, before I take action.
-
-
I guess my point was, how would you know where we go from here if you don’t know where we’ve been.