Duane(Pa)'s latest activity
-
Duane(Pa) reacted to av8or3's post in the thread Looking for ideas on broken stud removal with
Like.
I really appreciate everybody’s input. Before asking for advice I thought about locking it in our end mill and using a small (1/4”) new... -
too cheap to past up.cs330t.
-
I dumped the existing fuel in all my saws into the tractor and mixed up fresh 93 octane BP with stabilizer and Husky oil at 40:1. Will...
-
Duane(Pa) reacted to Squish9's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
Picked up this old Dolmar grinder last week. Does anybody know anything about them? USG wheels seem to fit it. Only has 35 degree marks...
-
Duane(Pa) reacted to Paul Fithian's post in the thread Looking for ideas on broken stud removal with Like.
Check https://opeforum.com/threads/how-to-remove-a-broken-bolt-flush-with-the-crankcase.29486/#post-1501377
-
Duane(Pa) replied to the thread Are 1/4 pitch 0.050 chains like 13RMS and H00 compatible with 71PM3 type spur sprockets?.IDK if the sprocket fits other things besides a battery saw. My HT56 pole saw came with 1/4 .050 I don't recall how it looks on the...
-
Duane(Pa) replied to the thread Looking for ideas on broken stud removal.Nothing to add to the removal suggestions. I'm subbing to the thread. Don't stress too much about wrecking the threads, a Time-Sert will...
-
You can still buy a 353 from Paveen and slap a 346 jug on it.
-
Mostly it is the tip on the worm drive. They get to short
-
report】 i will start this project with 3D print plastic model with price USD 22 in japan as a depth checker having wider depth range...
-
Duane(Pa) replied to the thread WANTED 346 brake flag.So, the 09 fits NE but not OE? I will have to look at mine but it’s 25 miles away 😕
-
That's an 09 which doesn't fit my 2 346s...without modification
-
Duane(Pa) replied to the thread WANTED 346 brake flag.https://www.ebay.com/itm/323625472160?_trkparms=itmf%3D1%26aid%3D1110006%26rkt%3D12%26asc%3D20231207125618%26mech%3D1%26algv%3DSimplAMLv1...
-
Duane(Pa) replied to the thread Another chainsaw dyno....I'd just axe Joe... He has about a bajillion pulls under his belt...
-
my answer for how often i adjust my carb is just as simple as when it needs it. and if it needs to be adjusted lots start looking for...
