Duane(Pa)'s latest activity
-
Traverse Creek. Duke Thieroff -
The Duke's is probably your best bet.
-
Duane(Pa) replied to the thread Saw video thread.Me too
-
Just a word of warning, never tighten muffler bolts when the saw is warm. When installing a new gasket or muffler run a few heat cycles...
-
Duane(Pa) replied to the thread Ms362 exhaust leak..Fixed my stripped threads with a borrowed Time-Sert kit yesterday. Slicker than greased goose sh1t. Might just buy my own kit one of...
-
Duane(Pa) replied to the thread Saw video thread.Giver a vac check 👍🏻
-
Landfill fresh!
-
Overall performance. I guess it's of no consequence now. It's on it's way.
-
Duane(Pa) replied to the thread 020t just WILL NOT oil!.There is a black rubber thingamajig at the pump outlet check for crack or clog. I’m with EFSM on the vent. Just replace. Or prove it by...
-
Check the tank vent. I had a saw recently that wouldn’t oil for anything and the vent was completely clogged.
-
Duane(Pa) reacted to blacksmith's post in the thread UPCOMING Central PA 5th Annual Hawg Day's June 19th, 20th and 21st 2026 with
Like.
Well all I have some good news and bad news. Good news is that the club is getting some logging done up on the mountain and part of the... -
Duane(Pa) replied to the thread How Often Do You Adjust Your Carb?.Yes. As you said, a saw would be very difficult to do any work with if tuned 1/8 turn rich of factory max no-load. 1/8 turn rich of...
-
Duane(Pa) replied to the thread FOUND IT Ported 2511t- closed.I think OP has closed the thread. I expect he has probably found what he was seeking?
-
Duane(Pa) reacted to jacktheripper's post in the thread How Often Do You Adjust Your Carb? with Like.
All my actual “user” saws have a scrench holder on the handle. I drill a hole in it and stick a Stihl screwdriver in it too.
-
Duane(Pa) replied to the thread How Often Do You Adjust Your Carb?.He said peak rpm, not factory max no load... I have had hated saws that I intentionally tried to kill/blow up with carb screws. No...